Condenser installations UKKZ UKM, UKMT, UK, UKMF, UKRM, etc.

Low voltage capacitor installations: adjustable, multi-stage
Designed to compensate for reactive power in networks with a voltage class up to 1000 V with variable load. The operation of the installation is based on a microprocessor-based reactive power controller. The increase of cos φ in the network is carried out by tracking in real time the values of the power factor and correcting it by switching the required power of capacitors (control stages).
Series: UKM63.

• Low voltage capacitor installations are adjustable, multi-stage. Technical specifications.

Low voltage capacitor plants: upgraded, thyristor
Unlike installations with contactors, capacitor installations with thyristor control of the UKMT have a very high switching speed: because there is no need to delay the operation during the discharge of the capacitor. The use of UKMT is most relevant in networks with a rapidly variable load: stamping equipment, welding equipment, lifting and transport mechanisms, pumps and compressors with variable capacity, etc.
Series: UKMT.

• Low-voltage capacitor plants are upgraded, thyristor. Technical specifications.

Low voltage capacitor installations: unregulated
The units are designed to compensate for reactive power in 50 Hz distribution networks. In the designation of the installation: the first number is the rated voltage in kilovolts; the second is the rated power in kvars. The installations have a degree of protection IP21. They are performed in mounted and floor versions. They are used to increase the power factor of AC lighting networks with high-pressure gas-discharge lamps.
Series: UK, UK1, UK2, UK3, UK4, UK5, UK6.

• Low voltage capacitor installations are unregulated. Technical specifications.

Low voltage capacitor installations: adjustable, filter
UKMF type capacitor installations are designed to automatically compensate for the reactive power of consumer loads in general-purpose networks with a voltage of 0.4 kV and a frequency of 50 Hz, when using an electrical load with a nonlinear voltage characteristic.
Series: UKMF1, UKMF2, UKMF3.

• Low voltage capacitor installations are adjustable, filter. Technical specifications.

High voltage capacitor plants: upgraded
The installations are designed to increase the power factor (cos φ) of electrical installations of industrial enterprises and distribution networks with a voltage of 6-10 kV at a frequency of 50 Hz with fixed energy consumption during the hours of maximum and minimum loads in the operating mode of the power grid node.
Series: UKL(P)56M, UKL(P)57M.

• The high-voltage capacitor plants are upgraded. Technical specifications.

High voltage capacitor plants: filter
Designed to compensate for reactive power in electrical networks with an increased content of higher harmonic components with a constant or dynamic load. Condenser filter installations, which are sequential resonant circuits "capacitance-inductance" connected to 6-10 kV buses, compensate for reactive power at the fundamental frequency.
Series: UKL(P)F56, UKL(P)F57, UKRMF56, UKRMF57.

• High-voltage filter capacitor installations. Technical specifications.

High voltage capacitor plants with automatic regulation
Unlike unregulated capacitor installations, regulated ones have not only fuses and three-phase capacitors, but also vacuum contactors, as well as current-limiting reactors. Each fuse is equipped with a trigger indicator, which is controlled through an inspection hole. In addition, the capacitors are assembled with discharge resistors.
Series: UKRM56, UKRM57.

• High voltage capacitor installations with automatic regulation. Technical specifications.

Catalog 1

Catalog 2